Injora Brushless Micro Mbl32 Esc & 1721 Purple Viper Motor For 1/18 Trx4M Rc Upgrade

Note: The motor is only compatible with: 1/18 TRX4M, 1/18 Redcat Ascent18. Not compatible with 370 gearbox! The ESC is compatible with most of the receiver and remote combinations that with CH2 Never plug the battery upside down, otherwise the ESC will immediately burn out! Please program the ESC according to the motor specifications! If your transmitter does not control the car well, please try these: If you are using a 2S battery, please set the BEC output to 6.0V using the DIP switches. Different settings are required for 2S and 3S batteries! Before powering on, set the transmitter's throttle trim to 0% at neutral. Increase the distance between the transmitter and the car to avoid signal interference. For optimal performance, we recommend using a 3S Lipo battery. ESC Specifications: Part Number: MBL32 (MBL: Micro Brushless) Max.Current: 30A LiPo Cells: 2-3s Compatible Motors: INJORA 1721/2204 Applications: 1/18 1/24 RC Crawlers BEC: Max 3A BEC Output: 6.0v/7.4V (adjustable by DIP switch) Motor Connectors: PH2.0 3Pin Dimensions(L*W*H): 30*22*11mm Weight: 16g Waterproof: No Motor Specifications: Model Number: 1721 Motor Type: Sensorless Brushless Outrunner RPM/Volt: 2800KV Motor Poles: 14 Sine Mode Power: 7 No-Load Current (11.1V): 0.7A Max Peak Current: 30A Motor Connectors: PH2.0 3Pin Dimensions: 16.7*20.9mm Motor Output Shaft Diameter: 2mm Motor Pinion: 0.4mod 11T Weight: 19g Waterproof: Yes